Industrial Machine Quiz

JavaScript isn't enabled in your browser, so this file can't be opened. Enable and reload.

Brother, Atlas and Walking Foot Machine Quiz

Email *

First Name *

Last Name *

Before starting, what do you need to make sure of? *

1 point

Check the speed of the machine

Needle size

Machine threaded properly

Upper and bobbin thread are the same material and size

All of the above

Which way should you turn the handwheel for straight and zig-zag industrial machines? *

1 point

Towards you.

Away from you.

Is aligning the spool stand important? *

1 point

No. It doesn't matter because the machine straightens the thread itself.

Yes. Its important to do this before sewing because it affects the tension.

Before sewing, It is important to have the threads (bobbin and upper) positioned under the presser foot. *

1 point

True

False

Sew ONLY when there is fabric underneath the presser foot. *

1 point

True

False

When sewing should you *

1 point

pull the fabric ?

let the machine feed the fabric ?

To lock the stitch at the beginning and end of the seam, what is recommended to do? *

1 point

Leave a tail of thread

Backstitch at the beginning and end

The standard stitch length is *

1 point

3.5

2.5

3.0

Does it matter if the bobbin and upper thread are different thread sizes (TEX) and materials (polyester, cotton, nylon, etc...)? *

1 point

No. It wouldn't affect the stitches.

Yes. You should use same thread size and material.

The needle systems of one machine and another are interchangeable. *

1 point

True

False

You can position the long groove of the needle any which way. *

1 point

True

False

Unscrew the screws all the way when you are replacing the needle.

1 point

Yes, it's the correct way.

No. They are easy to loose and hard to replace.

Clear selection

Which of the following options (more than 1) regarding the MAXIMUM needle size compatibility is correct? *

3 points

Brother : Maximum 100/16

Brother : Maximum 110/18

Atlas : Maximum 100/16

Atlas : Maximum 100/18

Walking foot :19 and up.

Walking foot : 100/16

Required

What is the lifetime of a needle ? *

1 point

It is unlimited.

15 hrs according to the manufacturer

Should you adjust the bobbin tension? *

1 point

Yes. It's the first step you should take when a tension issue comes up.

No. Only Area Managers can adjust the bobbin tension.

When inserting the bobbin back in its bobbin case, the bobbin has to make a *

1 point

"p" shape

"q" shape

What steps should you take for troubleshooting in case you are having issues with the machine? *

4 points

Check for lint and blow air with "Duster"

Investigate the needles. Is it the right type, dull, broken? If so change the needles.

Check to make sure the machine is threaded correctly.

Red Tag the machine and add a note on the sign-in sheet

First

Second

Third

Last

The industrial iron always needs to lay head flat on the silicon plate. *

1 point

False

True

Adjust the tension when the presser foot is *

1 point

up.

down.

For correct tension, the needle and the bobbin threads should be *

1 point

locked in the center of the thickness of the material.

locked on the top side of the material.

locked on the bottom side of the material.

If the tension of the needle thread is too loose, *

1 point

the bobbin thread will show along the upperside of the material.

the bobbin thread will show along the underside of the material.

Fine and delicate fabric=

1 point

higher number of upper thread tension.

lower number of upper thread tension.

Clear selection

The Brother is set to work for

1 point

light to medium weight fabric

medium to heavyweight fabric.

Clear selection

Submit

Clear form

Never submit passwords through Google Forms.

This content is neither created nor endorsed by Google. Report Abuse - Terms of Service - Privacy Policy

Forms