JavaScript isn't enabled in your browser, so this file can't be opened. Enable and reload.
Wood Shop & SawStop Policy & Safety Quiz
Step 1: Review the
Wood Shop
safety materials on the PPM Wiki
Step 2: Review the
SawStop Table Saw
safety materials on the PPM Wiki
Step 3: Complete the Woodshop Orientation & Sawstop Certification Course found on our
Meetup Page
*** You must pass this quiz and take the course to be provided access to the Wood Shop and SawStop ***
Sign in to Google
to save your progress.
Learn more
* Indicates required question
Email
*
Your email
Name
*
Your answer
By using the SawStop you accept responsibility for safe operation and agree to pay ($150) for brake and blade replacements required due to false activation of the safety system.
*
1 point
True
False
Safety is your responsibility at PPM
*
1 point
True
False
Gloves should not be used when operating power tools in the Wood Shop because they can get caught on a motor or blade and cause serious injury
*
1 point
True
False
Loose clothing, jewelry, and long hair can get caught on a motor, blade or other rotating object and cause serious injury. Therefore extra caution should be taken to restrain loose clothing, remove jewelry, and tie hair back
*
1 point
True
False
Safety Glasses are required in the Wood Shop when power tools are being operated by yourself or other users
*
1 point
True
False
What do you do if you find something wrong with a tool or a piece of equipment?
*
1 point
Put a Red-tag on it describing the problem, and report it on PPM Slack, # red-tag-issues page.
Ignore it and put it away.
If you are careful, you can work in the Wood Shop if you are under the influence or tired
*
1 point
True
False
All wood, especially upcycled and reclaimed wood should be scanned with the metal detector before running through the SawStop?
*
1 point
Yes
No
When adjusting the blade height, it should be set to
*
1 point
Just barely above the stock height
About 1/8" to 1/4" above the stock height
About 1/4" to 1/2" above the stock height
1/2" or more above the stock height
It is my responsibility to avoid false triggers by being sure the following materials do not trigger the safety system.
*
4 points
Wood with high moisture content
Laser cut or engraved stock
Staples, screws, nails, or aluminum foil
Treated lumber
Required
Which materials are authorized to cut on Wood Shop power tools (check all that are true)?
*
2 points
Solid Wood
MDF
Upcycled/recycled wood (no paint or nails!)
Plywood
Metals
Painted Lumber
Required
Is it permissible to use power tools with composites and plastics?
*
1 point
Yes, there are no risks associated with using power tools for cutting composites and plastics.
No, they can release dangerous fumes during cutting.
Yes, but it is important to research all materials, take precautions to ensure there are no harmful fumes released and no chips blocking the tool's functionality or the dust collection ability
Can you use the miter gauge and the fence at the same time for ripping sheet goods?
*
1 point
Yes
No
Before cutting material on the SawStop, you should use the moisture meter to test the wood?
*
1 point
True
False
Use push sticks for cutting narrow pieces and never put your hand closer than _____ to the blade.
*
2 points
2"
3"
4"
6"
After completing work at the SawStop, you should....
*
2 points
Press stop button, and wait for the saw to come to a complete stop.
Lower the blade completely below the table.
Clean up around the saw, including the blade guard and shavings around the table saw.
Dispose of all scrap pieces in trash bin or dumpster.
Put all accessories away in appropriate place.
Log out of TESLA
Inspect the cabinet for saw dust, ensure dust collection is unclogged, and clean as necessary.
Required
The area in front of the electrical panel is to be kept clear of obstructions
*
1 point
True
False
By using the Wood Shop, you are agreeing to use the check-in/check-out system, clean up your mess, AND do an additional cleaning sequence task posted on the door
*
1 point
Yes
No
You agree to be courteous and respectful of other people in the Woodshop
*
1 point
True
False
Comments on this quiz
Your answer
A copy of your responses will be emailed to the address you provided.
Submit
Page 1 of 1
Clear form
Never submit passwords through Google Forms.
reCAPTCHA
Privacy
Terms
This form was created inside of Pikes Peak Makerspace.
Report Abuse
Forms