Learning Beyond-Technical QUIZ 2-Structural Engineering

JavaScript isn't enabled in your browser, so this file can't be opened. Enable and reload.

We "Learning Beyond training institute" is conducting series of technical quiz for Structural Engineers & Civil Engineers which will help them to assess and enhance their knowledge.

Email *

full name *

Batch No

1. In the following figure-1, the slab is

5 points

Two way

One way

None of the above

Clear selection

2. If we design a beam of span 6m. If load on beam is same, in which case the steel required will be less-

0 points

Beam with both ends fixed

Simply supported beam

Cantilever beam

Clear selection

3. If the ultimate load on footing is 1500KN and net SBC of soil is 100 KN/m2, the footing area required will be-

5 points

15m2

25m2

10m2

20m2

Clear selection

4. A water tank wall of width 1m has bending moment=30 KN-m. What will be approx. minimum thickness of wall required, if the un-cracked working permissible bending stress in in concrete is 2 N/mm2,

5 points

100mm

200mm

300mm

Clear selection

5. A water tank is having size 4mx4mx4m supported on 4 columns at the corners. The water tank is of concrete and its self-weight of concrete is 160Kn. What will be the working load on each column if the water tank is full.

5 points

40KN

80KN

200KN

Clear selection

6. If high rise building is of height is 120m and number of floors as 40 Nos. what will be approx. time period for this building—

5 points

12 Seconds

4 Seconds

40 Seconds

Clear selection

7. If steel column A carries Axial compressive load and column B carries tensile load, which column will have more capacity for same height and cross sectional area?

5 points

Column A

Column B

Clear selection

8. A simply supported truss N Type is having span=8m, depth of truss=2m and udl on it is =10KN/m.What will be max tension in the bottom chord?

5 points

80KN

40KN

160KN

Clear selection

9. In the following figure-2, the frame and bracings are made of concrete. Which framing system is better from structural point of view.

5 points

Clear selection

10. The column capacity increases if –

5 points

column height is more

minimum radius of gyration is more

Slenderness ratio is more

All of the above

Clear selection

11. In below fig 3, Match appropriate

5 points

SLIDES

ELONGATES

ROTATES ABOUT ITS OWN AXIS

ONE SIDE ELONGATES OTHER SHORTENS

SHORTENS

Clear selection

FIG 3

12. In below Fig4. Stress strain graph match appropriate material type to which it corresponds-

3 points

BRITTLE MATERIAL

ELASTIC MATERIAL

PLASTIC MATERIAL

Clear selection

FIG 4

13. In design of concrete column, which permissible stress is used?

5 points

0.67 fck

0.4fck

0.87fck

Clear selection

14. In design of mild steel, which permissible stress is less as per code?

5 points

permissible tensile stress

permissible shear stress

permissible bending stress

Clear selection

15. Live load for non-accessible terrace as per IS code is-

5 points

1.5 KN/m2

2.0 KN/m2

0.75 KN/m2

Clear selection

16. If the beam size is 1000mm wide x 600mm deep, and moment on beam is 100KN-m. What is the bending stress in beam?

5 points

10N/mm2

1.67N/mm2

60N/mm2

Clear selection

17. Stress at the base of box in the following figure is-

0 points

500.75 Kn/m2

241.75 Kn/m2

Clear selection

18. Three beams of same size are made of aluminium, timber and concrete. If the span of both beam is same and load on it is same, which beam will deflect more-

5 points

Aluminium

Timber

Concrete

Clear selection

19. In the following software which is not an analysis software-

5 points

STAAD

ETAB

REVIT

RAM

Clear selection

20. In ETAB Software which local co-ordinate system is used for members?

5 points

x, y, z

1,2,3

a, b, c

Clear selection

Submit

Clear form

Never submit passwords through Google Forms.

This content is neither created nor endorsed by Google. Report Abuse - Terms of Service - Privacy Policy

Forms