Table Saw Quiz

JavaScript isn't enabled in your browser, so this file can't be opened. Enable and reload.

Table Saw Quiz

Email *

First Name

Last Name

What should be done with articles of clothing such as ties, coats, and long sleeves when operating the table saw? *

1 point

Keep them away from the saw blade

Remove or fasten them out of the way

Do not get close to the blade

Have a helper hold them out of the way

How do you turn on the saw_________. *

1 point

Turn on power switch, wait for solid green light and flashing red light to stop. then pull paddle to start saw.

Turn on power and pull paddle

Pull the paddle to turn on the saw.

What is the minimum length stock allowed on the Table saw? *

1 point

6 inches

8 inches

10 inches

12 inches

When cutting, what height should the tablesaw blade be set to? *

1 point

all the way up

between the bottom of the tooth and the gullet.

1/2"

as high as you want

When should you use the dust collector? *

1 point

after all cuts

during all cuts

only when making long cuts

if you want to

Which materials should you use the metal detector on? *

1 point

plywood

questionable wood

dimensional lumber

all wood

Required

When operating the table saw you should stand *

1 point

to the right side of the blade

in line with the blade

to the left of the blade

wherever you want

When should you use a push stick? *

1 point

always

never

whenever hands are in the danger zone

when you're not confident

What will set off the SawStop brake? (multiple answers) *

1 point

Wet wood

Metal

Fingers

Hot dogs

Required

After a cut is complete what should you wait for before you leave the saw? *

1 point

the blade has stopped moving

the workpiece is clear of the blade

the saw is turned off

the cut is complete

When crosscutting _____________. *

1 point

you cannot crosscut on the tablesaw

only use a crosscut sled or miter gauge

the fence should be locked and clamped in place

the fence should be unlocked and free to move

Required

Can you make freehand cuts on the tablesaw? *

1 point

Yes

Only if you're comfortable

only if you use pushsticks and featherboards

What should you do when you're done using the tablesaw? (multiple answers) *

1 point

Clean up all dust on saw

Lower blade below table level

Return bevel to 90°

Turn off saw

Required

Submit

Clear form

Never submit passwords through Google Forms.

This content is neither created nor endorsed by Google. Report Abuse - Terms of Service - Privacy Policy

Forms