TSM 114 BCA IIPP TSM QUIZ

JavaScript isn't enabled in your browser, so this file can't be opened. Enable and reload.

TSM-114 Welding Safe Practices [07/04/2021 - 07/17/2021]

PLEASE USE YOUR CITY OF LOS ANGELES EMAIL ACCOUNT......DO NOT USE ANY OTHER EMAIL HERE

Email *

City of Los Angeles ID Number *

First_Name *

Last_Name *

District *

Supervisor *

1. The most common hazard for welding related injuries is which of the following? *

1 point

Explosions

Eye related injuries from UV or IR light

Fires

Fumes that cause respirator problems

Electric shock or electrocution

2. The number one PPE required for working around welding? *

1 point

Leather outer layers to protect against flash burns

Leather gloves

Tinted lenses for helmets or goggles

Hearing protection

High top leather work boots

3. When is ventilation required for welding activities to prevent against the hazards of fumes? *

1 point

A. Only for rooms less than 10,000 sq ft

B. In all designated areas

C. When ceilings are lower than 16 feet

D. Confined spaces

E. When welding in a trench or excavation

All the above

Only A-C-D

4. Extended exposure to welding fumes over years can lead to lung cancer and severe damage to the nervous system? *

1 point

True

False

5. Why is the welding inspector required to wear full body protection clothing while inspecting welding operations? *

1 point

Required by the contractor's Permit Authorizing Individual

Protection against UV burns

Cal-OSHA requirements

Looks good

6. Welding Safety Goggles/Helmets help protect welders against Photokeratitis, also known as "welder's flash." What is the minimum tint required when working around arc welding operations? *

1 point

7. Which of the following are classified as hot work? *

1 point

Brazing

Metal cutting

Any open flame producing sparks

Torch applied roofing

Grinding

All the above

8. Per Cal-OSHA and NFPA the primary purpose of a hot work permit is which of the following? *

1 point

To establish written procedures to prevent fires resulting from any temporary operation involving open flames

To establish protocols for safely performing welding operations

To establish control boundaries that protect other workers or the public from entering an area that has welding operations

Is a training protocol for workers when performing any hot work activities

9. NFPA requires that fire extinguishers must be within 100 feet from a welding operation or within a 3,000 sf ft area? *

1 point

True

False

10. NFPA and Cal-OSHA requires that all flammable liquids or materials must be? *

1 point

A. Removed within 35' of the work

B. Watering down the area to prevent sparks from catching

C. Cover all flammable materials with fireproof blankets

D. Putting in large fans to ventilate

E. Have a fire watch with fire extinguisher present

All the above

Only A & C

11. A fire watch is required for all hot work permits unless what? *

1 point

A. There are no flammable materials near within 35'

B. The weather is overcast and raining

C. Work is being performed in an authorized designated area

D. There are two or more welding in the same area

E. The Permit Authorizing Individual (PAI) decides the area is safe

All the above

Only A & E

12. Guidelines from the Hot Work Permit - An Inspectors Guide references Cal-OSHA §6777. Hot Work Procedures and Permits, which states that when hot work is being performed outside as part of construction work that a hot work permit is not required if the area is what? *

1 point

A. Where it is safe to smoke

B. There are fire extinguishers available

C. Maintain a fire watch during the operation and at least 30 minutes after the hot work has been completed

D. No flammable materials exist and/or are properly made safe

Only A & D

All the above

A copy of your responses will be emailed to the address you provided.

Submit

Clear form

Never submit passwords through Google Forms.

reCAPTCHA

Privacy Terms

This form was created inside of City of Los Angeles. Report Abuse

Forms