JavaScript isn't enabled in your browser, so this file can't be opened. Enable and reload.
CiViL_it_UP
Mock Test - 01 for AE/JE
Sign in to Google
to save your progress.
Learn more
* Indicates required question
Email
*
Your email
Name
*
Your answer
Find the Hardness of the Stone, if the percentage of wear is 9% ?
1 point
18
16
19
17
Clear selection
what is the Minimum Crushing strength of Brick As per IS-1077:1957 ?
1 point
2.5 mpa
3.5 mpa
5.5 mpa
4.5 mpa
Clear selection
what is the Minimum tensile & Minimum compressive strength of Cement at 3 days & 7 days respectively in N/mm2 or mpa ?
1 point
17.5 & 2
2.5 & 17.5
2.5 & 11.5
2 & 17.5
Clear selection
Which of the following wood is best suited for Sports articles & Railway Sleepers respectively ?
1 point
Mulberry & Kail
Teak & Mulberry
Kail & Mulberry
Teak & Deodar
Clear selection
Which of the following defect in painting is caused due to result of bad ventilation ?
1 point
Blistering
Fading
Bloom
Flashing
Clear selection
How many Mangalore tiles are required per Sq.m ?
1 point
13
18
12
15
Clear selection
Which of the following is added to steel to increase resistance to corrosion ?
1 point
Copper
Manganese
Carbon
Sulphur
Clear selection
What is the amount of water required to Hydrate 500 kg of cement ?
1 point
140 lit
133 lit
113 lit
123 lit
Clear selection
Which of the following Test can be used to determine the Optimum Dosage of Admixture ?
0 points
J-Ring
V-Funnel
Marsh Cone
All of the above
Clear selection
Which of the following is example of Accelerator ?
1 point
Sodium Chloride
Sodium Benzoate
Calcium Chloride
Calcium Sulphate
Clear selection
Which of the following is best suitable for Nuclear power plants?
1 point
High performance concrete
High Density Concrete
High Strength Concrete
All of the above
Clear selection
Which of the following statement is false ?
1 point
Decreasing in Water content will decrease workability
Bigger size aggregate will have more workability
Increased Aggregate/Ratio gives more workability
None of the above
Clear selection
Why wet concrete specimen is not preferred for compressive strength or Split tensile test ?
1 point
Because Wet state concrete specimen shows 10 % more strength compared to dry state specimen
Because Wet state concrete specimen shows 15% more strength compared to dry state specimen
Because Dry state concrete specimen shows 15 % more strength compared to wet state specimen
Because Dry state concrete specimen shows 10 % more strength compared to wet state specimen
Clear selection
Which of the following test is used for finding poison's ratio of concrete ?
1 point
Rebound hammer
Ultrasonic pulse velocity
X-ray
None of the above
Clear selection
What is the Datum temperature adopted for calculating maturity of concrete in degree Celsius ?
1 point
- 11
11
- 10
12
Clear selection
As per IS-456:2000, minimum mixing time of concrete in mixer should not be less than
1 point
2.5 min
1 min
2 min
1.5 min
Clear selection
what is the Minimum & Maximum size of the plate used in plate load test respectively?
1 point
50 & 150 cm
25 & 100 cm
30 & 75 cm
45 & 100 cm
Clear selection
As per National Building Code of India 2005, all foundation should extend at least ______ m below GL
1 point
0.3 m
0.5 m
0.75 m
0.25 m
Clear selection
What is the minimum thickness of concrete provided in DPC ?
1 point
4 cm
5 cm
2 cm
3 cm
Clear selection
As per IS-2212:1991, what is the minimum crushing strength of brick used in R.C Masonry ?
1 point
3.5 mpa
5.5 mpa
7.5 mpa
10 mpa
Clear selection
In stone Masonry, one bond stone should be provided for every____m2
1 point
0.5
1
0.3
0.25
Clear selection
Which of the following the structure is constructed for protection of Natural Sloping ground ?
1 point
Buttress
Threshold
Retaining Wall
Breast Wall
Clear selection
Which of the following bond is useful for Wall thicker than Four Brick thickness ?
1 point
Diagonal bond
Zig-Zag bond
Herringe bond
Raking bond
Clear selection
Second Coat of plastering is called as_______
1 point
Rendering coat
Floating coat
Finishing coat
Under coat
Clear selection
Identify the pointing, it is modification of Flush pointing by keeping bottom at face level and pressing the top by 10mm.
1 point
Rubbled
Tuck
Recessed
Struck
Clear selection
Thickness of the slab is measured nearest to
1 point
0.01mm
0.005mm
0.002mm
0.001mm
Clear selection
What is the Surface excavation ?
1 point
Excavation exceeding 1.5m in width & 10 Sqm in plan & Depth not exceeding 0.3 m
Excavation not exceeding 1m in width & 10 Sqm in plan & Depth not exceeding 0.5 m
Excavation not exceeding 1.5m in width & 10 Sqm in plan & Depth not exceeding 0.3 m
Excavation exceeding 1.2m in width & 9 Sqm in plan & Depth not exceeding 0.5 m
Clear selection
No Deduction shall be performed in Stone & Brick Masonry up to area not exceeding
1 point
0.1 sqm
0.5 sqm
0.8 sqm
0.2 sqm
Clear selection
Expected outturn of B.B.M in C.M in Foundation & plinth per Mason per day _____ Sqm
1 point
1.25
1.5
0.75
1
Clear selection
Revised estimate is calculated, When original sanctioned estimate exceeds more than ____ % or Administrative sanction exceeds ____ %
1 point
5 & 10
10 & 5
8 & 15
5 & 15
Clear selection
Floor area includes balcony up to
1 point
25 %
50 %
75 %
12.5 %
Clear selection
Activities lying on Critical path has
1 point
Free Float
Maximum Float
Zero Float
Minimum Float
Clear selection
Which of the following Network analysis best suited for R & D activities ?
1 point
CPM
PERT
Both
None of the above
Clear selection
Who is the Divisional Head of KPWD or CPWD ?
1 point
CE
AE
SE
EE
Clear selection
When contractor submit Tender, He/She has to submit _____ % of total cost of project as E.M.D
1 point
3
5
2
1
Clear selection
Which shaped tunnel is best suited for railways ?
1 point
Egg Shaped
Circular
Horse Shoe
Elliptical
Clear selection
Open cuts can't be used for depth exceeding____m
1 point
13
15
14
16
Clear selection
Ducts used in Tunnel should conform______
1 point
IS 655
IS 665
IS 658
IS 645
Clear selection
What is the angle between the reflecting surfaces in optical square ?
1 point
15
30
45
60
Clear selection
As per IS 1492-1559, the tolerance limit allowed in testing of chain of length 30 m ?
1 point
+/- 3
+/- 5
+/- 8
+/- 10
Clear selection
which of the following formula is used for Angular check of the closed traverse for Interior angles ?
1 point
(2n+4)*90
(2n-4)*360
(2n-4)*180
(2n-4)*90
Clear selection
The size of the Dumpy level is specified by _____
1 point
Dia of Telescope
Length of telescope
Focal length of objective
Focal length of eye piece
Clear selection
where is G,T.S Bench mark adopted by Survey of India ?
1 point
Karachi
Kolkata
Chennai
Kochhi
Clear selection
Contour which has increase in Elevation from outside to Inside denotes______
1 point
Hill
Depression
Pond
None of the above
Clear selection
The size of the Theodolite is specified by _____
1 point
Dia of Upper Plate
Dia of Lower Plate
Focal length of eye piece
Focal length of objective
Clear selection
What is the formula used for Line parallel to East-West (Departure) ?
1 point
L Cos θ
L Sin θ
L tan θ
L Sinθ Cosθ
Clear selection
Which of the following Element of Curve is also called Versed Sin (Versine) ?
1 point
Mid ordinate
Tangent Length
Apex Distance
Long chord
Clear selection
Select the correct statement, Sensitivity of the bubble tube is
1 point
directly proportional to Viscosity
directly proportional to Surface tension
Independent of Surface tension & Viscosity
None of the above
Clear selection
Which of the following Steel shape is not specified by L*B*t ?
1 point
Steel plate
Steel Flat
Steel strip
None of the above
Clear selection
In Design of steel structure, design wind load speed is assumed to be constant from the Ground level up to ____ m
1 point
5
8
15
10
Clear selection
Which of the following doesn't belong to Limit State of Serviceability ?
1 point
Deformation
Deflection
Vibration
Stability of structure
Clear selection
Calculate the yield strength of Steel having ultimate tensile strength 400 mpa ?
1 point
415 mpa
550 mpa
300 mpa
240 mpa
Clear selection
As per IS 800, when large sized holes are drilled, it will punched at least ______
1 point
3mm more in dia
3mm less in dia
5mm more in dia
5mm less in dia
Clear selection
Most suited bolt for joint subjected reversal of stresses ?
1 point
Block Bolts
HSFG Bolts
Friction Grip Bolts
All of the above
Clear selection
A square groove weld is provided up to ____ mm
1 point
5
8
10
3
Clear selection
What is the Maximum size of weld that can be deposited on Rectangular & Round edge respectively ? T - Thickness of thinner plate
1 point
(T-1.5) & 0.75 T mm
(T-1.0) & 0.75 T mm
(T-1.5) & 0.85 T mm
(T-1.5) & 0.50 T mm
Clear selection
As per IS 800 splice connection should be designed for _____ times the member design capacity in tension ?
1 point
0.2
0.3
0.4
0.5
Clear selection
What is the Slenderness ratio of member carrying Dead & Live load ?
1 point
450
180
250
300
Clear selection
Which of the following section is best suitable for Steel Column ?
1 point
ISMB
ISHB
ISLB
All of the above
Clear selection
Which of the following occurs in Steel beams, when the concentration of stress occurs at junction of the web & flange. As a result of large bearing stress developed below concentrated loads ?
1 point
Web crippling
Web buckling
Both
None of the above
Clear selection
As per IS 456, the Minimum diameter of ties used column should not be less than
1 point
0.75 times dia of Longitudinal bar or 6 mm
0.5 times dia of Longitudinal bar or 6 mm
0.5 times dia of Longitudinal bar or 8 mm
0.25 times dia of Longitudinal bar or 5 mm
Clear selection
As per IS 456, maximum percentage of steel used in Beam & Column respectively ?
1 point
4 % & 6 %
6 % & 4 %
0.15 % & 4 %
4 % & 0.15 %
Clear selection
The load stress of a RC structure can be reduced by ___
1 point
Increasing the total perimeter of bar
Replacing smaller bar by larger no of greater bar
Replacing larger bar by providing the small bar more in no
Decreasing the lever arm
Clear selection
The maximum compressive strain in concrete in axial compression is taken as
1 point
0.003
0.002
0.45
0.0035
Clear selection
As per IS 456, Anchorage value of 45 degree bend should not be less than ____ times the dia of bar.
1 point
16
4
32
8
Clear selection
As per IRC the grade compensation is not requried for grades flatter than _____ % because the loss of tractive force is negligibile
1 point
2 %
3 %
4 %
5 %
Clear selection
Find the CBR Value at 2.5 mm penetration, Corrected test load = 41.1 kg
1 point
3 %
2 %
4 %
1 %
Clear selection
The shape of the STOP sign a/c to IRC:67-2001
1 point
Circular
Octagon
Square
Triangle
Clear selection
What is the value of the lateral coefficient of friction as per IRC ?
1 point
0.15
0.007
0.3
0.35
Clear selection
Which of the following is not included in PIEV reaction theory ?
1 point
Perception time
Volition time
Intefering time
Emotion time
Clear selection
Maximum value of super elevation provided in Horizontal alignment of a Highway
1 point
0.15
0.35
0.07
0.03
Clear selection
The Intermediate Sight distance is equal to
1 point
OSD
SSD
2 OSD
2 SSD
Clear selection
Strian energy stored in a body due to suddenly applied load compared to gradually applied load is _______
1 point
1 time
2 time
3 time
4 time
Clear selection
Identify the force, whose line of action lies in the same plane, but having different line of action
1 point
Coplanar & Non collinear
Non Concurrent & Non coplanar
Collinear & Non Coplanar
Concurrent & Non Collinear
Clear selection
What is the Effective length of the column, when both the ends fixed ?
1 point
L = l/2
L = l
L = l/root 2
L = 2l
Clear selection
The shear stress at the center of circular shaft is
1 point
Zero
Maximum
Infinity
Minimum
Clear selection
Which of the following methods cant be used for finding the Deflection of the beam ?
1 point
Double Integration Method
Macauleys Method
Superposition Method
None of the above
Clear selection
Beam is said to be in Pure bending, when it is subjected to Constant ______
1 point
Shear force
Bending moment
Both Shear force & Bending Moment
None of the above
Clear selection
Identify the type of support, where the transitional motion is arrested, but not the rotation ?
1 point
Simply Support
Hinged Support
Fixed Support
All of the above
Clear selection
Find the Elastic Modulus of the Material, Take Poisson's ration = 1 & Rigidity Modulus = 2 mpa
1 point
4 mpa
6 mpa
8 mpa
10 mpa
Clear selection
Body having uniform properties through out & Body possesing same properties through out ?
1 point
Homogenous & Isotropic
Isotropic & Homogenous
Isotropic & Orthographic
Orthographic & Homogenous
Clear selection
Which of the following Statement/s is/are true?
2 points
A only
A & B
B & C
All of the above
Clear selection
Which of the following Statement/s is/are true?
2 points
A & C
A & B
B & A
All of the above
Clear selection
Which of the following Statement/s is/are true?
2 points
A only
C only
A & B
B & C
Clear selection
Which of the following Statement/s is/are true?
2 points
A only
B only
Both A & B
None of the above
Clear selection
Which of the following Statement/s is/are true?
2 points
A only
B only
A & C
All of the above
Clear selection
Which of the following Statement/s is/are true?
2 points
A only
C only
A & C
A & B
Clear selection
Which of the following Statement/s is/are true?
2 points
C only
A & B
B & C
None of the above
Clear selection
Which of the following Statement/s is/are true?
2 points
A only
B only
C only
A & B
Clear selection
A reinforced cement concrete beam section has a size of 300 mm width and 400 mm effective depth, the grade of concrete used is M20 and grade of steel is Fe 415. What is the limiting moment of resistance of the given beam?( Approximately) in kN-m
2 points
133
140
138
123
Clear selection
Calculate the No of cement bags that can be stored in a Ware House having internal dimension 15*5.6 m, Height 2.7m? Hint take Clearance As per IS
2 points
3036
3600
3330
3016
Clear selection
Please give your feedback & Suggestions to improve Test Quality, if you feel any question/s or Marked answer/s is/are wrong. Let us know. we will correct those questions.
Your answer
Send me a copy of my responses.
Submit
Page 1 of 1
Clear form
Never submit passwords through Google Forms.
reCAPTCHA
Privacy
Terms
This content is neither created nor endorsed by Google.
Report Abuse
-
Terms of Service
-
Privacy Policy
Forms
