Ace Brewer - Quick Set Up Guide
Use this quick guide for the following.  
1. Assemble your Ace Brewer
2. Connect to the Smart Brew Portal via Wifi
Sign in to Google to save your progress. Learn more
Video Instructions:
Written Instructions:
Ace Brewer Exploded View
Ace Brewer- Assembly Parts
Assembling the Brew Cylinder
To assemble the brewing cylinder the order is as follows.  Place the perforated grate (8) on the inside of the cylinder base (7).  On top of the perforated grate, place a nylon filter (9), then place the silicon seal (10) on top of the nylon filter on the inside of the cylinder base.   Note - To secure glass cylinder in brew base - wet bottom of cylinder, use hand to push in the seal.   Seat cylinder down flat on top of the seal clamp to lock into brew base.
Now that your Ace Brewer is assembled lets connect the power supply and water source to the Brewer.
Connect Power and Water Source - As Shown Below
2.0 - Setting up Wifi.
Let's get your Smart Brewing set up by connecting the Ace Brewer to the Brew Bomb Cloud.  
Using the ENCODER Knob on LEFT of the front panel, turn until SETTINGS is highlighted in Red and Push In to select.  
Locate your WiFi Network using the ENCODER Knob and Push in to select.  If your network is not listed go out to the main screen and proceed back into the Connect to WiFi option.  Repeat until your network is listed.
Using the ENCODER Knob scroll through and enter your password.  Use SHIFT for UPPER CASE and non shift for lower case letters. When finished select DONE - Device Info – Confirm Network Select - CONTINUE
Once entered the system will bring you back to the main menu.  Confirm the WiFi connection has a connection by the WiFi bars in the upper right hand corner of the menu.
Congratulations.. You have completed the Assembly and Connected the brewer to your Smart Brew Portal.
Submit
Clear form
This form was created inside of brewbomb.com. Report Abuse
Google Forms