QFRL100 Private GB [Interest Form]

Introduction:

Greetings, long keyboard enjoyers! I am planning on do a private GB for my long boy project, QFRL100. QFRL100 is an FRL 100% form factor or more like NeXT layout. It utilizes top & bottom mounts using what I am calling them pads.

Note that I am making this form to check for interest in this private GB run and potentially to a GB. Due to the lower MOQ (25) the price will be high... 

The target price currently is ~$550 (the price subject to change... I wish I could lower it more....) without a carrying bag. As for the carrying bag, it's possible to use W1-AT carrying bag and cut the keyboard casing foam corners both sides inside. I will try my best to check the possibility of including a custom carrying bag at a lower MOQ at a reasonable price.
 
Note: The keyboard will be manufactured by DDS.

Please join discord the details of Private GB will be posted there:
 
Keyboard Details:
Case:
  • layout: 100% FRL.
  • W: 437.575  mm * L: 115.2 mm.
  • Front H: 17.98 mm (Effective 21.55mm), Back H: 34.466 mm.
  • Typing angle: 7.5 degrees.
  • Mount: Top mount and bottom mount using pads
  • Case screws: 2.5 mm - M2.5.
  • Through brass weight * 2.
  • Weight screws: 3 mm - M2.5.
  • Plate surface distance: 7.8 mm.
  • Alignment pillars total of 6.
  • Unbuilt weight: ~2.1 KG.
Plate:
  • Top & bottom mount.
  • Plate thickness: 1.5mm.
  • Plate material: Aluminum, FR4, PC and (could be) PP.
  • Pad thickness: 1.5mm.
  • Pad material: FR4, PC or PP.
  • Mounting pads or screws 20 M2 × 0.4 mm.
PCB: 100% FRL layout designed by me Thebloodyezkb.
  • 100% FRL.
  • W: 428.6 mm * L: 96.8 mm.
  • Thickness: 1.6 mm.
  • Soldered.
  • PCB layout support: 10U spacebar, Split backspace, ISO enter, 1.25U left shift and 1.75U right shift, 2U and 1U Numpad.
  • Daughter Board with JST cable.
  • Firmware: QMK, VIA and Vial.
What is included:
  • Aluminum top case.
  • Aluminum bottom case.
  • Plate.
  • 2 through brass weights.
  • Soldered PCB.
  • Screws (extra included).
  • Bottom buttons (for bottom mount).
  • Mounting pads.
  • Daughterboard with JST cable.
  • Chad carrying case (optional).

Email *
Your discord name *
QFRL100 Structure
QFRL100 prototype V2
QFRL100 weight engravings
Are you interested in QFRL100 Private GB? *
Where are you from?
 *
Colors: According to QFRL100 Geek Hack IC form 'Silver' & ' Black' were the highest picks, however I am open to make this GB a color exclusive (Max 2 colors). *
Captionless Image
Required
The default PCB will solder PCB. Are you interested in Hot swap PCB? *
If you are interested in Hot swap PCB will you join a Private PCB run? (Lowest MOQ is 5) *
Which top case you would like? I will pick one layout due to the low MOQ. *
Are you interested in custom carrying case bag? *
Which you would prefer for the GB, a normal USB cutout or an arch 'The House' cutout? *
Would like engraving on top case or\and bottom *
If your answer was "Yes" which side top, bottom or both?
Clear selection
Would you be interested in extras part? Example: plates with different material, weight options materials, etc. *
Any additional feedback or suggestion is appreciated.
Submit
Clear form
Never submit passwords through Google Forms.
This content is neither created nor endorsed by Google. Report Abuse - Terms of Service - Privacy Policy
Google Forms