Hello e-biker
Would you like to set or tune motor controller parameters? Or update motor firmware for M500, M510, M560, M600, M620, M820 motors and run Calibration?
K1 Flash is compatible with all Bafang CAN bus motors (5 pin connector with "house" shape) and can set at least basic parameters for all CAN Bafang motors, including CAN hub motors.
"Simplicity" was the moto during developing. Do not expect any display or BT connectivity, everything is done automated after K1 power up. Status can be identified according colour LED.
Simple as 1, 2 ,3 ...
1. Insert included SD card (with set of firmwares - cca 60 firmwares, including M600 rev.B, 2x 48V firmware for M500 rev.B, M510 FC2.0, M820 and beta firmware for M560 - 500W, 750W and 1000W )
2. Power up K1 Flash (over USB-C cable from your mobile, power bank, charger ...)
3. Connect to your CAN motor - steady green LED light means all set and you can unplug device
In a minute your motor is flashed and parameters set according config text file on SD card.
No need to get BESST and connecting to computer, finding BESST passwords (are expiring) or spending time with Python script workarounds. Also no need to search for bin firmware files on internet.
Plug, Wait a minute and Ride... time is money ;)
This form explains about functionality (step by step) and how to use this device, tips, pictures, videos, file examples (
only 6 pages - takes 10 minutes to read). At the page 5 is pricing, payment and shipping information.
So far, only latest motor M510 FC2.0 and M560 is supporting all the setup parameters. M510 FC1.0 and M820 is supporting max power at each PAS level and global acceleration parameter. Rest of CAN Bafang motors (including CAN Hub motors) still supports Speed limit, Circumference and Wheel size (see notes in next section for throttle speed limit).
Check also K1 BB Racing - allow you to discharge battery deeper and get 10 to 15% more range. Also can disable power limitation at low SOC %. Set speed limit, ASLS function and Run motor calibration.
If you like this product please give like or follow also
FB page.
