Welding Shop Safety Test 2023

JavaScript isn't enabled in your browser, so this file can't be opened. Enable and reload.

RETAKE Must Pass with a 100% Unlimited attempts

Full Name *

Classroom Period *

Required

1. Horseplay or practical jokes will not be tolerated in the shop. *

1 point

True

False

2. Running in the shop is not allowed. *

1 point

True

False

3. If you find anything wrong with the tools or equipment in the shop report it at once to the instructor. *

1 point

True

False

4. Never wear loose clothing or jewelry while operating any machinery with moving parts. *

1 point

True

False

5. Clean up grease, oil, and liquid spills immediately. *

1 point

True

False

6. It is okay to leave oil spills on the benches, tables or the ground. *

1 point

True

False

7. Electrical equipment should be grounded through the ground wire (3 prong plug) unless its double insulated (plastic shell). *

1 point

True

False

8. Always work in your assigned area with safety glasses on. *

1 point

True

False

9. Never leave tools lying on the floor or in an aisle. Keep them toward the center of a table / work place or put it away when finished. *

1 point

True

False

10. All students must know the location of the first aid equipment. *

1 point

True

False

11. Rotating or moving parts must have a safety guard in place before operation. *

1 point

True

False

12. Report all injuries to your instructor for treatment regardless of how small the injury is. *

1 point

True

False

13. Use water to extinguish electrical and gas fires. *

1 point

True

False

14. All Students know the location of all fire extinguishers in the shop and how they are used. *

1 point

True

False

15. If your clothing catches fire, run for water. *

1 point

True

False

16. Always bend your knees and keep your back straight when lifting heavy objects. *

1 point

True

False

17. PASS means Pull, Aim, Squeeze, Sweep with a Fire Extinguisher. *

1 point

True

False

18. Always carry long or heavy objects by yourself. (stock over 8 ft) *

1 point

True

False

19. Always wear your safety glasses when working in the shop. *

1 point

True

False

20. All machines should be adjusted while they are moving and plugged in. *

1 point

True

False

21. In the case of a cut or slice injury, keep pressure on the wound to stop the bleeding. *

1 point

True

False

22. If you receive a small (1st or 2nd degree) burn, the best first aid is to flush the burn with cool water for an extended period of time. *

1 point

True

False

23. Keep fingers away from any moving machinery or parts. *

1 point

True

False

24. The instructor’s permission, training and passing a safety test is required before using any power tools or equipment. *

1 point

True

False

25. Water should be used to put out all fires in the shop. *

1 point

True

False

26. In case of a seizure, have the person lie down, roll on their side and protect their head until the seizure stops. *

1 point

True

False

27. Frayed or worn electrical cord use is prohibited (not allowed) in the shop. *

1 point

True

False

28. You must have three points of contact and never stand on the top or second to the top step of a ladder. *

1 point

True

False

29. In case of a fire alarm, turn off the machine / torch and walk out the nearest exit. *

1 point

True

False

30. Never move an injured person unless it is a matter of life or death. *

1 point

True

False

31. If an accident happens, you need to report it to the instructor immediately especially if it’s small. *

1 point

True

False

32. It is okay to talk to the operator of a machine while he/she is using it. *

1 point

True

False

33. Closed toe shoes must be worn in the shop. *

1 point

True

False

34. Adjust or clean all machines while they are in motion. *

1 point

True

False

35. When drilling a hole, when a bit starts to break through the material they should press down harder on the drill. *

1 point

True

False

36. Always mark all metal to be drilled with a center punch. *

1 point

True

False

37. Always remove the drill chuck key before starting the drill. *

1 point

True

False

38. Shavings on the drill press should be brushed off with your hand before drilling a new piece of stock. *

1 point

True

False

39. The drill chuck should always be slowed to a stop by hand. *

1 point

True

False

40. Two hand are required when using portable drills. *

1 point

True

False

41. Never use a dull bit. *

1 point

True

False

42. Always use a vise or holding device to secure metal when cutting, grinding or drilling hole in any material. *

1 point

True

False

43. The saw or drill should be stopped before clearing scraps from the tabletop. *

1 point

True

False

44. Do not use wrenches that are badly chewed, worn or sprung. *

1 point

True

False

45. Always pull on a wrench to prevent slips and scrapes. *

1 point

True

False

46. Tools with sharp edges should not be carried in your pocket. *

1 point

True

False

47. Cut away from yourself and others when using sharp hand tools. *

1 point

True

False

48. Do not use a file without a handle. *

1 point

True

False

49. Hammers with loose heads, cracked handles or chipped faces shall not be permitted (allowed) in the shop. *

1 point

True

False

50. Keep loose clothing away from moving parts on power tools. *

1 point

True

False

51. If you do not have the right tool for the right job just use whatever you can find. *

1 point

True

False

52. Safety glasses must be worn at all times in the shop. *

1 point

True

False

53. If you are in doubt about safety procedures for equipment operation, you should ask your instructor for help. *

1 point

True

False

54. A face shield is required when using the cut-off saw (chop saw) and a cutting wheel. *

1 point

True

False

55. When grinding or wire buffing small objects, always consult with the instructor before doing so. *

1 point

True

False

56. Grinding metal is not allowed on the side of a grinding wheel. *

1 point

True

False

57. The operator should stand on one side of the grinder when starting the machine. *

1 point

True

False

58. Use a rag to hold work that is to be ground on the grinder. *

1 point

True

False

59. The Piranha can safety cut / notch flat bar and angle iron. *

1 point

True

False

60. Never grind aluminum!!! *

1 point

True

False

61. A face shield should be worn and ear protection while using an angle grinder or cut off wheel. *

1 point

True

False

62. Never run over an electrical cord, it can damage the wires or cause a fire. *

1 point

True

False

63. Before leaving the wire buffer, turn off the power and wait for it to stop. *

1 point

True

False

64. All adjustments should be checked after turning on the power. *

1 point

True

False

65. It is dangerous for the operator or anyone else to stand in line with a blade or wheel while it is in operation. *

1 point

True

False

66. The wire buffer has no safety guards, buffing is only allowed on the front lower half of the wheel. *

1 point

True

False

67. The saw or drill should be stopped before clearing scraps from the tabletop. *

1 point

True

False

68. Round stock and angle iron can be safely cut on the chop saw. *

1 point

True

False

69. Disconnect an electrical cord by pulling on the cord rather than the end plug. *

1 point

True

False

70. The Piranha cannot move if the power is off. *

1 point

True

False

71. Never operate the electrical switches on equipment with wet hands or gloves. *

1 point

True

False

72. Do not investigate or try to fix broken or down power tools. Report a tool malfunction to the instructor. *

1 point

True

False

73. Electrical cords or power tool cords with exposed wires are safe to operate in the shop. *

1 point

True

False

74. When punching holes with the Piranha, the die must be bigger than the punch by at least 1/32 of an inch or larger depending on size. *

1 point

True

False

75. Jewelry should be removed and long hair pulled back when working in the shop. *

1 point

True

False

76. Safety guards on machines must be in place before using any equipment. *

1 point

True

False

77. There should be no more than 1/8” between the tool rest and the grinding wheel. *

1 point

True

False

78. The wire buffer must be turned off and come to a dead stop before leaving the machine. *

1 point

True

False

79. Distraction by a cell phone in the shop is dangerous and can cause an accident. *

1 point

True

False

80. It’s ok to put any part of your body inside the Piranha when on. *

1 point

True

False

81. Safety Glasses must be worn at all times in the shop. *

1 point

True

False

82. Paints, Acetone, and Paint Thinner are highly flammable and need to be removed from the welding area. *

1 point

True

False

83. Never weld, cut or grind near flammables (less than 25 ft). *

1 point

True

False

84. The worker should not trust on the jack or chain hoist to hold up a piece of machinery. Rather, the worker should put a saw horse or other support under it as well. *

1 point

True

False

85. It’s ok to put gas, diesel, or any flammable liquid in your mouth. *

1 point

True

False

86. The welder (person) needs to insulate themselves from their work. *

1 point

True

False

87. The arc light from an electric arc welding will not hurt your eyes. *

1 point

True

False

88. Never make repairs to electrical units until you know the current is off (unplugged or the electrical breaker is off). *

1 point

True

False

89. If someone commits a safety violation, hit them upside the head. *

1 point

True

False

90. Allow for proper ventilation when welding or painting. *

1 point

True

False

91. Never point high-pressure air hoses at anyone or yourself. *

1 point

True

False

92. Obtain permission, training and pass a safety test from the instructor before using any welding or oxy-fuel equipment. *

1 point

True

False

93. Make sure you have ample (enough) ventilation when welding. *

1 point

True

False

94. When you have finished welding, you can remove your safety glasses in the shop. *

1 point

True

False

95. Sunglasses are not a safe alternative to safety glasses. Safety glasses must be Z 87 approved. *

1 point

True

False

96. It is okay to wear shorts while welding in the shop. Bare legs are much cooler allowing you to work harder. *

1 point

True

False

97. If you are in doubt about safety procedures for equipment operation, you should ask your instructor for help. *

1 point

True

False

98. Chrome books and cell phones are allowed to be used while working in the shop or near welding equipment. *

1 point

True

False

99. When working in the shop, you must be able to hear the instructors directions and the fire alarm. *

1 point

True

False

100. The safety information covered by this test completely covers all aspects of shop safety. *

1 point

True

False

You are finished, make sure your answer document is submitted correctly and sit quietly until all students have finished.

Submit

Clear form

Never submit passwords through Google Forms.

This form was created inside of Muhsd.k12.ca.us. Report Abuse

Forms