Developer self-assessment

JavaScript isn't enabled in your browser, so this file can't be opened. Enable and reload.

This form is made for developer to prepare the device to connect to Everynet LoraWAN Network.

Email *

Name of company *

Contact Person Name

Phone Number

Device Type

Smart Water Meter

Smart Gas Meter

Smart Electricity Meter

Tracker

Temperature Sensor

Humidity Sensor

Water Level Sensor

Carbon Dioxide Sensor

Lora Adapter

Data Logger

Other:

Clear selection

Information

1. The Device need to be able to connect and send uplink to 8 channel that is provided.
2. Keys and EUIs can be supplied pre-configured with device, Created and programmed by Everynet or Pre-integrated to 3rd party join server
3. DEV_EUI and APP-EUI must be from IEEE*
4. Uplink can be send by either periodic or event triggered.
5. Device parameter may be configured remotely or Locally
6. Operating temperature of device depends on the device deployment requirements.
7. The type of power supply can be either internal or external power.
8. The device may use more than 1 LoRaWAN Frequency Region.
9. The device need to be certified by POSTEL (Indonesian Government regulation)
10. Antenna that can be used is wire, PCB, external or other antenna that have maximum power EIRP of 20dB.
11. The device need to re--certify when a new major LoRaWAN specification version is released.
12. Device mobility profile can be static, walking speed or random

*This only applies for Big amount off devices. for small amount don't have to be from IEEE
**The full information can be found:
1. Specification 1.0.3 : https://lora-alliance.org/resource-hub/lorawanr-specification-v103
2. RP2-1.0.2 LoRaWAN® Regional Parameters: https://lora-alliance.org/resource_hub/rp2-102-lorawan-regional-parameters/
3. LoRa Alliance Certification document: https://lora-alliance.org/lorawan-certification (AS923 V.1.1.1)

Some Reference code found here:
https://github.com/Lora-net/LoRaMac-node (1.0.3)

Picture 1 (Channel Plan)

Picture 2 (Rx Frequency)

Picture 3 (Transmit Payload Size (Byte) and Data Rate) (This include 11 Byte of Header so Maximum for the data is Max Payload - 11)

Developer Checklist (Required)

1. Device have to support join method ABP or OTAA

2. Device uplink channels that are used followed the Picture 1 standard

3. The application server send downlink to the devices with the Picture 2 standard

4. If the payload is more than the specification max payload (Picture 3). The picture is already included 13 Byte of LoRa Header (Your payload + 13 byte LoRawan header minimum should be less than the standard)

5. The device MUST support LoRa test mode (Send 0x01010101 to port 224)

6. The value for "ADR_ACK_Limit" is 64

7. The value for "ADR_ACK_Delay" is 32

8. The first join request or first uplink recommended to sent on SF12

9. The uplink Data rate follow the following specification (Picture 3)

10. The allowed RX1 Data Rate offset is 1s

11. The Receive Delay for Rx1 = 1s and Rx2 = 2s

12. The Receive Delay RX1 on Join request is 5s (OTAA Only)

13. The device need to support uplink & downlink sequence Number

14. Join message recommended to use the highest transmit power (20dbm)

15. For Static Device need to have ADR on

16. The device support 32 Bit Counter

17. Important configuration parameters should be supported via LoRaWAN downlink messages. At least, uplink timeout should be configurable via using downlink.

18. Uplink messages frequency of any nature (Join or any other uplink) must be randomized.

19. The device need to support all mac Command in the "List of Mac Command" check box list**

List of Mac Command (Required) (All mac command can be refer on End Device Specification and LoRa Alliance Certification Document)**

NewChannelRequest MAC Command

DIChannelRequest Mac Command

RxParamSetupReq Mac Command

RxTimingSetupReq Mac Command

LinkADRReq Mac Command

TxParamSetup Mac Command

Optional Feature, But Mandatory for Massive Deployment (i.e. utilities)

Data Redundancy (Several Data history need to be saved, and the devices must send current data and several previous data)

Randomize Transmission Time for each devices (Device send data at randomize time to avoid sending at the same time . Ex= 1:03 , 1:09, 1:15, etc.)

The Device Have been certified by LoRa Alliance

Minimum Required LoRa Alliance Certification(Optional)

Test Mode Activation

Downlink Error Rate

Downlink Window Timing

Frame Sequence Number

Device Status Request

All Mac Command From previous check list box

Packet error rate Rx1 and Rx2

Send me a copy of my responses.

Submit

Clear form

Never submit passwords through Google Forms.

reCAPTCHA

Privacy Terms

This form was created inside of Everynet. Report Abuse

Forms