ADT 7100 Dicing Saw SOP Quiz

JavaScript isn't enabled in your browser, so this file can't be opened. Enable and reload.

Email *

Full Name *

What is the maximum diameter for a circular sample to be diced in the ADT 7100? *

1 point

Four inches

Eight inches

Six inches

One inch

What is the maximum thickness of a sample to be diced in the ADT 7100 with the standard blades? *

1 point

550 µm

650 µm

1.5 mm

2 mm

What is the cleanliness classification of the ADT 7100 dicing saw? *

1 point

CMOS-compatible

Semi-clean

Metals

It does not have a classification

The water level is check in a regular basis by the staff. Users don't need to check the water level. *

1 point

False

True

The dicing blades are provided by the LNF. *

1 point

True, they are covered by the entrance fee.

False, each user should have their own. They can be purchased at the LNF store.

This tool does not use blades, it uses a laser beam to cut

This tool does not use blades, it uses pressurized water to cut

If a computer message asks you to create a database backup, you should: *

1 point

Click Cancel and ignore it

Click ok and perform the backup. It only takes a few seconds

Create a helpdesk ticket and leave the tool as is

Immediately push the EMO red button and leave the room

If a new recipe needs to be prepared for dicing your silicon sample, you should: *

1 point

Copy a recipe from another user, it does not matter which one

Copy a recipe from another user that seems to be similar to what you need

Copy a recipe from the standard group and change the parameters accordingly

Do nothing, this tool cannot dice silicon

When do you need to use the silver spacer when loading you blade? *

1 point

Never, this tool is just for unmounting blades from their flange.

When using a hubless blade.

When using a blade with a built-in hub.

Whenever you want, this is optional.

When unmounting you blade, you need to remove the spindle nut. If you keep the spindle fixed with the Allen wrench, you rotate the spanner __________ to loosen it. *

1 point

Clockwise

Counterclockwise

The spindle nut does not rotate, it is clamped

Either way should work

What is the proper way to turn off the tool? *

1 point

End your reservation, the system will turn off automatically

Click exit in the dicing program. Then turn off the windows system

Log out in the dicing saw, press the OFF button, wait at least two seconds, press the OFF button one more time.

Press the OFF button, wait at least two seconds, press the OFF button again.

What does the depth parameter in the dicing recipe represent? *

1 point

The distance between the surface of the chuck and the bottom of the blade.

The thickness of the sample

The thickness of the sample plus the thickness of the tape

The exposure of the blade

What is the thickness of the provided blue mounting tape? *

1 point

3 mil

3 mm

300 µm

30 µm

Submit

Clear form

Never submit passwords through Google Forms.

This form was created inside of Lurie Nanofabrication Facility. Report Abuse

Forms